This post was sponsored by Spellbinders, however, all opinions and reviews are 100% honest. This post may contain some affiliate links for your convenience. Clicking these links will help support this blog so I can keep creating things to share with you, but you will never pay more by using an affiliate link. Click here to read my full disclosure policy.
How to Make a Painted Brass DIY Desk Organizer
- 3 sheets coverstock
- Platinum 6 Die Cutting Machine
- Chicken wire embossing folder
- 14″ piece of 1×4 wood
- Permanent spray adhesive
- Hot glue gun and glue sticks
- Metallic gold spray paint
- Black stamp pad
- Clear matte spray paint
Cut 2 pieces of coverstock to 8 1/2 inches wide by 4 1/2″ inches tall. Place one of the pieces in the embossing folder. It will not fit completely, just let the left over edge hang out the one side. Create your embossing sandwich with the platform on the bottom, the embossing folder with the coverstock inside, then a cutting plate on top. Run it through the Spellbinders Platinum 6 machine.
Now reinsert the half embossed coverstock into the embossing folder. Line up the already embossed area inside the grooves of the embossing folder. Recreate your embossing sandwich as above and run the paper through the machine.
Now you have a fully embossed piece of coverstock. Take the second sheet of coverstock that you already cut and coat the back with spray adhesive. Glue it to the back of the embossed paper about 1/2″ in from the edge so you have an overhang of the non-embossed sheet on one side and and overlap of the embossed sheet on the other side. Make sure the top and bottom are flush.
Let the glue dry while you repeat the above steps with 2 – 3 1/2″ x 8 1/2″ pieces and 2 – 2 1/2″ x 8 1/2″ pieces of coverstock. Also cut 2 pieces of coverstock to 1 1/2″ x 8 1/2″.
Before embossing the 1 1/2″ pieces, cut it to fit around your post-it notes. Score lines to fold the pieces so they will wrap around the post-it notes. Then angle the sides.
After embossing one piece, fold both pieces of coverstock and then glue them together with the spray adhesive.
Now turn your 3 embossed coverstock pieces into cylinders and glue together with hot glue on the overhang you left when you glued the two pieces of coverstock together.
Line the pieces up on your piece of wood. Trace the inside of each cylinder. Then add hot glue to the outside of the circle and position the cylinder over the glue. Repeat with all three cylinders, then glue the post-it note holder on as well.
It’s time for paint. I wanted my DIY desk organizer to look like brass. There are brass accents on a couple of the pieces I am using in my room. It’s funny that 10 years ago I would have purposely avoided anything brass. But now I am embracing and loving the rustic brass look. So much so that I actually want it in my new room.
They do not make a brass spray paint (at least not that I have found) and so I created by own painted brass look. I started by painting the entire DIY desk organizer with metallic gold spray paint. Then I grabbed a black stamp pad and rubbed it around the entire desk accessory.
The black stamp added a worn look to the gold and brought out the chicken wire embossing detail. It was the perfect solution for the brass look, but was pretty messy. Nothing a bit of scrubbing cannot fix though.
After you get the perfect brass look on your DIY desk organizer, cover the entire thing with a coat of matte clear coat to seal the look and take off a bit of the shine. This will also keep those fingers from rubbing off the black effect every time you touch your new desk accessory. And it turned out just like the brass ram that I was using as my inspiration. Yay!
Now all that is left is to fill your new DIY desk organizer with all your must have office supplies! I have turned into a pencil girl again after years of working in a place where I was required to use pens. So my large container is full of my favorite pencils so they are always ready for me to create!
The other cylinder holds my favorite crafting tools. No more searching for the things I use the most. The smallest cylinder holds paper clips. And my ever loved Post-it notes finish off the perfect desk organizer.
And don’t you just love that texture! It was so easy to add this texture with the Spellbinders embossing folder. Now I need a few more designs to see what else I can emboss.
Now I am so close to a completed office & craft room to show you. I better finish the painting and decorating. Stay tuned for the big reveal!