Skip to Content

Easy DIY Halloween Lamppost

This easy DIY Halloween Lamppost is a great way to add some spooky to your yard this October. Made from scrap wood and a cheap solar light, it’s the perfect outdoor Halloween decor idea.

I am a bit of a hoarder, but only for things I think I can use to craft or create with to make something new. If you walk into my kitchen, dining, living spaces you would think nothing crazy was lurking near. There would be small piles of mail and kid drawings, a few toys and books lying around, and a pair of shoes in each room. But other than that, no crazy hoarder boxes… then you walk into my craft area or garage and BAM! That is where I cannot throw anything out. I just know someday I will have an idea and then I will be able to reuse that bit of something in the most brilliant way, and the best part, it will cost me nothing. That is where this easy DIY Halloween lamppost came from!

Add some Halloween flair to you front yard with this Halloween lamppost. A spooky sign and inexpensive solar light make this an easy build for a beginner. Tutorial from housefulofhandmade.com.
For the past few years, I had 10 solar lights along my walkway to the front door. They were inexpensive lights with plastic casing, and they were destroyed by snow shoveling and kids. The plastic stakes that held the lights in the ground broke, but the lights still worked. This year I finally bought some new solar lights so I could get rid of the broken ones that were just laying on the ground where they were supposed to be staked in but no longer could be. I switched them out with the shiny new ones, but couldn’t throw the old broken ones away! They still work, so I knew I might be able to find a new place to use them.

Add some Halloween flair to you front yard with this Halloween lamppost. A spooky sign and inexpensive solar light make this an easy build for a beginner. Tutorial from housefulofhandmade.com.

This post may contain affiliate links. As an Amazon Associate I earn from qualifying purchases. Click here to read my full disclosure policy.

This last weekend, I had a lightbulb moment and decided to make a fun lamppost for our front yard for Halloween and using the solar light meant it would be super easy to put together with no electrical! Perfect. I used some scrap wood to make a cute wooden lamppost, added a spooky sign and the solar light and presto! Don’t you just love how it turned out?

Add some Halloween flair to you front yard with this Halloween lamppost. A spooky sign and inexpensive solar light make this an easy build for a beginner. Tutorial from housefulofhandmade.com.

If you don’t have lots of half-broken crap or scraps of wood lying around, don’t worry. You can still make a DIY Halloween lamppost for cheap! You can get the building supplies for around $6-7 and you can find cheap solar lights for $1-3. So you can easily build this for less than $10!

How to Make a DIY Halloween Lamppost

Materials:

  • 6′ of 1×2 lumber
  • 3′ of 1×3 lumber
  • 2′ of 1×1 lumber (I cut it on my table saw)
  • 18″ of scrap wood (I used a beat up piece from an old pallet)
  • 4′ piece of 3/8″rebar
  • 1 pocket hole screw
  • 1 1/4″ finishing nails
  • wood glue
  • black spray paint

Tools:

  • table saw
  • miter saw
  • nail gun
  • Kreg jig
  • measuring tape
  • hammer

Cut the 1×2 into 2 36″ sections with your miter saw. Then use the table saw to create notches down the center of the boards (you could use a router too if you have that). I set my table saw blade at 1/4″ tall then set the guide 1″ away from the blade. I ran the board through twice so I had two grooves on the board that were 1/2″ away from each edge.

Add some Halloween flair to you front yard with this Halloween lamppost. A spooky sign and inexpensive solar light make this an easy build for a beginner. Tutorial from housefulofhandmade.com.

Then I set the table saw guide so it was 7/8″ away from the blade and ran the board through twice again. Now I had two larger notches on each side of the board and the center was getting smaller.

Add some Halloween flair to you front yard with this Halloween lamppost. A spooky sign and inexpensive solar light make this an easy build for a beginner. Tutorial from housefulofhandmade.com.

I did this two more times, moving the guide 1/8″ closer to the blade each time until the grooves connected and I had a 1/2″ wide groove that was 1/4″ deep centered on my boards.

Add some Halloween flair to you front yard with this Halloween lamppost. A spooky sign and inexpensive solar light make this an easy build for a beginner. Tutorial from housefulofhandmade.com.

Add some Halloween flair to you front yard with this Halloween lamppost. A spooky sign and inexpensive solar light make this an easy build for a beginner. Tutorial from housefulofhandmade.com.

Glue the two boards together so the notches are in the center creating a channel through the entire board. Use wood glue and clamps to hold them together until dry. I further secured it with some finishing nails then let it dry overnight (cause I had somewhere to be for PTA business, it was a good stopping time anyway!).

Add some Halloween flair to you front yard with this Halloween lamppost. A spooky sign and inexpensive solar light make this an easy build for a beginner. Tutorial from housefulofhandmade.com.

Trimm out the top and bottom of the now 2×2 board with the 1×3 board. You can miter it or go the cheater way. I chose to miter it but my angles sucked a little bit. Oh well, it’s suppose to be an old spooky lamppost so bad corners and beat up boards are perfect. I specifically chose some of the most beat up boards for this project and didn’t sand it so it would look older and more beat up.

Add some Halloween flair to you front yard with this Halloween lamppost. A spooky sign and inexpensive solar light make this an easy build for a beginner. Tutorial from housefulofhandmade.com.

To hold the sign, cut an 18″ section of the 1×1 and used one pocket hole to secure it to the post just below the trim on the top. Cut a 5″ piece of 1×1 cut at 45 degree angles on both ends to secure under this to give this sign holder more support. I secured this with some finishing nails and I don’t have a pictures of this because it was too blurry, oops!

Add some Halloween flair to you front yard with this Halloween lamppost. A spooky sign and inexpensive solar light make this an easy build for a beginner. Tutorial from housefulofhandmade.com.

Now it’s time to paint, yep, no sanding needed. It’s a Halloween decoration and needs to look old and worn, so use bad boards and skip the sanding! I gave it a decent coat of paint, I wasn’t too picky cause I had to go pick up my kid from school. And while the paint dries, you can hammer your rebar into the ground. You want it into the ground at least 15 inches, so you will have just shy of 3′ sticking out, the lamppost will slide onto the rebar to hold it up even through the worst of the fall weather (that’s what the channel is for). When the paint is dry, slide your post onto the rebar.

Add some Halloween flair to you front yard with this Halloween lamppost. A spooky sign and inexpensive solar light make this an easy build for a beginner. Tutorial from housefulofhandmade.com.

To make the sign, I used a scrap of wood that I pulled off an old pallet. It was broken on one end. When I cut it down to size, the newly cut edge looked too perfect, so I started banging it around to beat it up, then I handed it off to my daughter. She did an excellent job of beating up the board!

Add some Halloween flair to you front yard with this Halloween lamppost. A spooky sign and inexpensive solar light make this an easy build for a beginner. Tutorial from housefulofhandmade.com.

Now it’s time to make your sign. We chose to write “BEWARE” with a “bloody” handprint. I used my youngest’s hand and she thought that was the coolest thing ever. Then when my son got home from school, he felt left out so he added his own touch with some scribbled letters. Our sign is adorably spooky (that’s a thing right?).

Attach the sign to the DIY Halloween lamppost with a couple eye hooks on the sign arm and on the sign. Then hang it up with some fishing wire. We made it a little crooked and added some cobwebs. Spooky perfection!

Add some Halloween flair to you front yard with this Halloween lamppost. A spooky sign and inexpensive solar light make this an easy build for a beginner. Tutorial from housefulofhandmade.com.

One of my broken solar lights fit into the center channel of the lamppost perfectly. I just had to press it inside the channel snuggly and it stayed.

Add some Halloween flair to you front yard with this Halloween lamppost. A spooky sign and inexpensive solar light make this an easy build for a beginner. Tutorial from housefulofhandmade.com.

Now we have a super spooky Halloween lamppost to greet our guests as they walk up our front path. We hung up our Easy $3 Skull Ghosts in the trees and tomorrow will be putting the rest of the outside decorations out. I love that my kids are having as much fun as me decorating for Halloween!

Add some Halloween flair to you front yard with this Halloween lamppost. A spooky sign and inexpensive solar light make this an easy build for a beginner. Tutorial from housefulofhandmade.com.

I ran outside just before it got dark and was able to get a picture of the lamppost with the light on! I couldn’t be happier 🙂

Add some Halloween flair to you front yard with this Halloween lamppost. A spooky sign and inexpensive solar light make this an easy build for a beginner. Tutorial from housefulofhandmade.com.

Now time to work on Halloween costumes! My kids have finally settled on a choice so it’s my turn to start working.

Signature-Full

Sara Syrett

Monday 10th of October 2016

What a fun Halloween project!

Kati

Monday 10th of October 2016

Thanks Sara.

April R - Uncookie Cutter

Monday 10th of October 2016

Adorable Kati! I might have to copy this (still haven't gotten my Halloween stuff up!!!)...pinning!

Kati

Monday 10th of October 2016

I think October snuck up on us this year, all of the sudden I realized I really needed to get after it or I would miss decorating all together (and my kids wouldn't be happy about that).

Sarah

Monday 10th of October 2016

I thought it was just the sign DIY not an entire lamppost! Awesome job, I love how it turned out!

Kati

Monday 10th of October 2016

Thank you Sarah! The whole lamppost was so easy to make and it can easily be stored away after Halloween.

Emily

Sunday 9th of October 2016

This is adorably spooky :) We tend to have a big crowd in our neighborhood for Halloween so I am ways wanting to add some more touches to the outdoor space, this would be a great one!

Kati

Monday 10th of October 2016

I love having a bit of Halloween outside and this is perfect. It was really fun to make too :)

BonBon

Sunday 9th of October 2016

Very impressive Kati. I love this.

Kati

Monday 10th of October 2016

Thanks BonBon :)

Comments are closed.

This site uses Akismet to reduce spam. Learn how your comment data is processed.