Skip to Content

Our DIY Playhouse: The Roof

Learn how to build a DIY playhouse. This week we have all the details for how to roof the outdoor playhouse.

The DIY Playhouse is all done! This week we completed the roof build and now our kids have the perfect place to play, even in the hot sun.

The roof material we chose blocks the harmful sun rays but still allows lots of light into the clubhouse. And now the kids can play outside in any weather.

Now we have all the kids playhouse posts ready for you to build your own outdoor wooden playhouse!

This post may contain affiliate links. As an Amazon Associate I earn from qualifying purchases. Click here to read my full disclosure policy.

Learn how to build a DIY playhouse. This week we have all the details for how to roof the outdoor playhouse. Housefulofhandmade.com

I was starting to feel like the kids outdoor playhouse was never going to be finished. July was a crazy month. And after waiting for the final roofing piece to arrive in the mail, we just had too much going on to get the roof build complete.

But after a couple strong summer rainstorms, I decided it was time to make the roof a priority. I’m so glad we did because the new roof is definitely the icing on the cake for the perfect outdoor DIY playhouse!

This is the perfect summer hideaway for the kids. Create a wooden DIY playhouse for lots of outdoor fun. Housefulofhandmade.com

There were many different options for roofing the playhouse. We considered so many of them before finally settling on using the Suntuf corrugated polycarbonate roofing panels from The Home Depot (this is not a sponsored post, I just really love this product).

These roofing panels were not the least expensive option, but the pros of using them outweighed the cost. They block 99% of harmful UV rays, which will not only protect the kids in the playhouse, but also protect the actual playhouse so it lasts longer.

They are super easy to install (minus the almost falling off the ladder part). And the Solar Gray color gives the whole house a shaded feel so it stays cooler in the hot months, but still allows 70% off the light in.

I love this DIY playhouse. The roof is covered in corrugated material that lets the light in but blocks the UV rays. Perfect for letting the kids play all day outside. Housefulofhandmade.com

There are many other ways you could roof a playhouse. I love the Suntuf panels we chose, but in case you want to try something else, here are some other playhouse roof ideas:

Once we had decided on what we would use to cover our playhouse, we needed to build a roof to support it. I am not going to lie, building a roof scared me. But it was actually really easy to do!

How to build a DIY playhouse. Get all the details including build plans, materials list, cost, and step-by-step tutorials. Housefulofhandmade.com

The roof build did require two sets of hands. I couldn’t hold the boards how I needed them by myself and clamps were not an option.

But with my husband’s help, we had the roof frame built in a morning (except for one board that was mis-cut and required a trip to get more wood).

After the roof of the DIY playhouse was built, adding the Suntuf panels was quite easy. It did require a bit of balancing on a step stool and ladder, but was really easy to do. So easy I am planning on using them again on another project soon!

Learn how to build a wooden outdoor playhouse for the kids. This DIY playhouse has it all: sandbox, climbing wall, slide and clubhouse! Housefulofhandmade.com

I absolutely love that the roof covers the entire playhouse deck. It will help protect all the kids toys during the winter. And the wood will last longer since it will be protected from the weather.

The kids feel so special with their own space to enjoy. They even asked for a broom for their playhouse so they can keep it clean.

And don’t miss the rest of the posts in the series. Click the links below for the rest of the playhouse build.

THE DECK || THE WALLS || THE RAILING || THE SLIDE & CLIMBING WALL

The DIY playhouse is done. See how we roofed it to protect the wooden playhouse and the kids this summer. Housefulofhandmade.com

Printable PDF Plans

Prefer to print the instructions?

Grab the complete build plans (from all 5 posts) in one easy to follow printable PDF here. The plans include:

  • List of recommended tools
  • Detailed supply lists
  • Easy to read cut list table
  • Step-by-step instructions with diagrams & pictures
  • BONUS: 3D SketchUp file

Material and cut lists include the totals for the entire build, as well as a break down for each step. Makes it easy to buy all at once or purchase as you go. 

Click the link below for everything you need to build your own playhouse and so you can get the kids outside playing for hours on end!

Button to buy playhouse PDF build plans.

How to Build a DIY Playhouse Roof

Tools:

Supplies:

  • Regular wood (if you paint/seal it for the outdoors it will last for years)
    • (5) 2×4 8′ boards
    • (4) 2×3 8′ boards
  • (3) 8′ Suntuf corrugated roofing panels
    • I used the Solar Gray color to give a bit of shade to the playhouse.
  • (2) 4′ Suntuf roof ridge pieces
  • (3) Suntuf horizontal closure strips 6-pack
  • (65) 2 1/2″ blue-kote pocket hole screws
  • (8) 2 1/2″ TimberLOK wood screws
  • 1 1/2″ gold screws (left over from the wall build)
  • (75) 2″ Woodtite fasteners
  • Exterior wood glue
  • Exterior paint (left over from wall build)
    • I used Ultra White by Behr for the roof of the DIY playhouse.

Cut 1 piece of 2×4 to 63″. This will be the roof ridge. Cut 8 pieces of 2×4 at 48″ with a 19 degree angle cut off one end. These will be the roof rafters.

You can paint the roof pieces now to make it easier. I pre-painted half of mine with my FinishMax paint sprayer and the others were easy to paint once installed.

Measure 1 1/2″ in from the back of the roof ridge piece and make a line. Measure 3 1/2″ in from there and make a second line. Drill 3 pocket holes in between these two lines so it can attach the roof ridge to the center wall stud on the back wall. I drilled 2 on one side and 1 centered between them on the other side.

Learn how to build a DIY playhouse with a roof. Build plans and tutorial on Housefulofhandmade.com

Drill 2 pocket holes in the angled side of each of the roof rafters. Remember these will be mirrored when installed so pay attention to what side of the wood you add the pocket holes so you don’t end up with them showing on the front of your DIY playhouse.

Building a roof is not as hard as it seems. See how we roofed our DIY playhouse. Housefulofhandmade.com

Attach the roof ridge to the top of the center wall stud with 2 1/2″ pocket hole screws and exterior wood glue. Make sure there is 1 1/2″ overhang on the back side.

Then attach two roof rafters to either side of the roof ridge so they are flush with the back of the ridge. The rafters should sit right on top of the wood paneling on the outside of the back wall.

Create a DIY playhouse for your backyard this summer. See how to roof it with corrugated panels on Housefulofhandmade.com

Secure the rafters to the side walls with a 2 1/2″ wood screw. Then repeat with the rafters on the front of the playhouse.

A simple peaked roof is perfect for our DIY playhouse. Housefulofhandmade.com

Cut the piece of 2×4 left over (after cutting the 63″ roof ridge) so it fits right under the ridge on the front of the playhouse. Secure it to the front roof rafters with 4 of the wood screws. This will help support the front of the roof since it is completely open.

I love how this open roof turned out. DIY playhouse plans on Housefulofhandmade.com

Before securing the rest of the roof rafters, you will need to notch out a spot for them to sit on the side walls.

The easiest way we found to mark these notches was to hold the rafter 1 1/2″ up from the bottom of the ridge. Then with the rafter resting on the side wall, sit a scrap of 2×4 next to it and trace the notch. Cut out the notch with a jig saw.

This is a great tip for easy to notch out roof rafters. See the whole DIY playhouse build at Housefulofhandmade.com

Attach the notched rood rafters to the ridge with 2 1/2″ pocket hole screws. Then attach the notched part to the side walls with pocket hole screws or left over decking screws, up through the stud on the top of the wall into the rafter.

Complete your DIY playhouse with an easy to build roof. Housefulofhandmade.com

To attach the Suntuf corrugated roofing to the newly built roof, you will need to add some 2×3 cross supports. You can just cut the 2×3 to 63″ and lay them on top of the roof rafters every 2′.

But I didn’t want the roof to be raised up above the rafters so I chose to cut the cross supports so they fit in between the roof rafters. Each cross support had to be measured to fit because the 2x4s weren’t perfectly straight. I used 2 pocket holes on either side of each 2×3 cross support to secure them to the rafters.

Now it’s time to add the roof! Attach the horizontal closure strips to the cross supports with the 1 1/2″ wood screws. Cut the closure strips as needed with tin snips (they are plastic and super easy to snip where needed).

I love the Suntuf roof on our DIY playhouse. Housefulofhandmade.com

Cut the (3) 8′ panels in half so you now have (6) 4′ panels. Clamp all the panels together and use a piece of scrap wood as a guide to keep your circular saw straight while cutting. Make sure to wear good safety glasses because little pieces of polycarbonate will fly everywhere when you cut it.

Cutting the corrugated roofing panels was super easy. See the entire DIY playhouse build at Housefulofhandmade.com

To attach the roofing panels to the roof, start on the back of the roof. You can easily reach it with a step stool in the playhouse and stepping up through the rafters and cross supports.

Pre-drill through the roofing panels with a 1/4″ drill bit, then carefully attach the panels with the Woodtite screws. Make sure the screws go in at a 90 degree angle to the roof and they are not over-tightened.

Use a drill that can be set with a lower driving setting instead of an impact driver to do this. You do not want to see dimpling in the roof where the screws are attached.

The Suntuf roof lets in light but blocks UV rays. Perfect for the kids DIY playhouse. Housefulofhandmade.com

Overlap the roofing panels so they all fit (I believe the back panel was overlapped 2 ridges and the front was 3 ridges). Secure the panels withe screws in every other ridge, but making sure to put a screw in the edge of each panel (so some areas the screws will not be every other because of how they overlap).

Once you have the panels on, it is time for the roof ridge panel. The playhouse was small enough I was able to stretch on a ladder and attach the ridge without having to climb onto the roof.

You will overlap the ridge piece on the top of the roof panels and secure to the horizontal closure strips at the top of the roof (closest to the roof ridge).

Create a perfect hideaway for the kids outdoor with this DIY playhouse. Housefulofhandmade.com

Now you have successfully completed the DIY playhouse roof! I felt the need to pat myself on the back because this what the first time I had roofed anything. It has made me realize I can really take on whatever I put my mind to.

The kids really are loving their playhouse. And I can’t wait until they get to go out and play in a rainstorm and put the new roof to the test. It’s seems like the perfect place to enjoy a summer rainstorm to me!

Learn how to build an outdoor playhouse for the kids. This DIY playhouse has a sandbox, climbing wall, slide and clubhouse! Get the plans on Housefulofhandmade.com

And now for the $$$. Here is what we have spent so far:

  • The deck = $196.96
  • The walls = $189.71
  • The railings = $17.76
  • The slide & climbing wall = $193.50

For the roof:

  • (5) 2×4 8′ boards = $16.80
  • (3) 2×3 8′ boards = $7.17
  • (3) 8′ Suntuf corrugated roofing panels = $65.91
  • (2) 4′ Suntuf roof ridge pieces = $35.54
  • (3) Suntuf horizontal closure strips 6-pack = $16.41
  • (65) 2 1/2″ blue-kote pocket hole screws = $10.94
  • (8) 2 1/2″ TimberLOK wood screws (left over from the wall build)
  • 1 1/2″ gold screws (left over from the wall build)
  • (75) 2″ Woodtite fasteners = $11.94
  • Exterior wood glue (left over from wall build)
  • Exterior paint (left over from wall build)

Total for roof: $164.71

Grand Total: $762.64

Build a DIY playhouse even if you have a small yard. We turned our yard into the perfect children's retreat. Housefulofhandmade.com

I was originally planning $650 for the playhouse. With the slightly more expensive roof, we were $100 over budget. But still, the playhouse cost less than the new iPad Pro and offers my kids way more hours of fun!

They love showing it off to anyone that comes to visit. And they almost always eat lunch in the “Clubhouse” so it is money well spent.

I would totally do it again, but I probably would start earlier or later so I wasn’t build in the middle of the summer heat 😉

-Kati with picture of blog author Kati
Build the perfect outdoor playhouse for the kids. Get hours of imaginative play with this DIY playhouse. Complete with slide, sandbox, climbing wall, and covered clubhouse. All the details are on Housefulofhandmade.com

Bridget

Sunday 28th of March 2021

Thank you for the detailed plans, so helpful! Is the suntuf roof loud when it rains? We are finishing up our play house and undecided on what roof to use. The noise won’t bother us, but we have neighbors on each side and small lots so want to be conscious of noise for them. I appreciate your time!

Kati

Monday 19th of April 2021

It can be loud, similar to a metal corrugated roof. But it was only bothersome with heavy rain or hail (if that makes sense).

Barbara

Thursday 24th of December 2020

Hi Kati! Thanks so much for sharing your playhouse with us. I love it, and your instructions have been so helpful to me as we've started to build a modified version for our daughter. I have two questions. 1) Do the Suntuf panels make the playhouse feel hot? This may not be an issue b/c you have a totally open side... Just wondering if the Solar Gray would turn our house (which will have 4 walls) into a little greenhouse here in Florida. 2) How have the horizontal boards held up for the climbing wall? Have they sagged at all? My husband is concerned about wind... Thanks so much!

Kati

Tuesday 19th of January 2021

No the Suntuf panels actually block the UV so they keep it cooler. We even used clear ones on our pergola and in the heat of the summer, I could feel the difference under the pergola. No sagging at all on the side boards. The lower ones are 2xs so they are thick and hte upper ones are secured in the center as well!

Deb

Wednesday 19th of August 2020

Do you think the rick wall Could be replaced with steps and a railing for special needs?

Kati

Tuesday 1st of September 2020

You can definitely adjust as needed. The climbing wall is not structural, the base is plenty strong without it.

brian

Tuesday 16th of June 2020

When doing the back rafter and how does it attach to the back wall if paneling covers wall 2x4? Did you have to end up recutting back paneling angel to expose 2x4 to drill into it? This is great and we are on the walls right now. Thanks!

Kati

Monday 22nd of June 2020

Can you just secure the 2x4s to the wall through the paneling? Mine was sitting just on top of the paneling so it exposed the corner of the side walls.

Shane

Friday 22nd of May 2020

I just finished this for my son's 3rd birthday. It looks amazing! We told him it was a dog house we were building for our pet to throw him off. This was a nice project and only took 3 weekends to finish. I bought the plans and that was a nice quick reference. (though some adjustments were needed) Overall this turned out great and I am really excited to spend some time in it this summer. Cheers!

Kati

Monday 22nd of June 2020

Thanks so much for the comment Shane! I love that you were able to throw him off my telling him it was a dog house. I am sure he will get many years of play from it!

Comments are closed.

This site uses Akismet to reduce spam. Learn how your comment data is processed.