This post contains some affiliate links for your convenience. Clicking these links will help support this blog so I can keep creating things to share with you, but you will never pay more by using an affiliate link. Click here to read my full disclosure policy.
How to Make a Faux Metal Farmhouse Sign
- Winter sign cut file
- Cover stock paper
- I made my sign 11×13 buy using this 11×17 paper and cutting it down to size
- Silhouette Cameo
- Metallic and hammered finishes spray paint
- 1×1 wood boards
- Wood glue
- Nail gun and finishing nails
- If you do not have a nail gun you can also use a hammer and nails or screws to secure your frame.
- Wire nails
Download the cut file for this sign, or design your own. When you DIY your own faux metal farmhouse signs, the sky is the limit (that is why we DIY). Cut it out with your Silhouette machine using the cover stock settings. Cover stock is a thicker cardstock and necessary to get a sturdy flat faux metal sign. Remove all the pieces of the saying inside your sign.
Now it is time to make your sign look like metal. I do this by using spray paint. Yes you read that right. You can spray paint paper! You will want the heavier cardstock to hold up to the spray paint.
Time to paint! For this project I started with a layer of Rustoleum Metallic Finishes in Silver then did two layers of Rustoleum Forged Hammered in Antique Pewter on top of that. But there are so many ways you can make paper look like metal. I shared all my tips & tricks for creating a metal finish on my paper crafts over on Silhouette School Blog today. Click here for all the details.
Once the paper was dry, I decided to add a frame behind my metal sign to give it a bit more of a presence on my mantle. Without a frame it would be perfect for hanging on a wall, but I wanted it to stand on one side of my mantle to balance things out.
To make the frame cut 2 pieces of 1×1 board the length of your sign plus 1/2 inch and 2 pieces the width of your sign plus 1/2 inch minus the 2x the width of the boards. My sign was 11×13 so my two long boards were 13 1/2 inches and my two short boards were 10 inches (11 1/2 – 3/4 – 3/4).
Make a frame with the boards by adding glue to the top and bottom of the long boards. Clamp the shorter boards to the be flush with the edges of the long boards and secure with a couple finishing nails.
Repeat on the other other side of the frame.
To secure your faux metal sign to the frame, all it takes is a couple wire nails tapped into the corners. The best part about it being faux metal, the nails easily go through it!
And look how well the real metal nail heads blend in with the faux metal sign. You can’t even tell a difference between them.
I am so happy with my faux metal farmhouse sign. It looks just as beautiful as the Fixer Upper metal signs that inspired me. Now I just need to decide what other saying I need sprinkled around my house. You better believe I am going to be making so many, many more of these!
And stay tuned for the final winter mantle reveal! It is officially done and I can’t wait to show you.