DIY Canning Accessory Caddy from Plywood Scraps

DIY wood caddy to hold canning supplies like lids, rings and jar lifters.

My raised garden beds are overflowing this year. Every day I fill my large harvest basket to the top! I have been busy in the kitchen working hard to preserve the harvest. One of my favorite preservation methods is to canning. We love canned tomatoes, green beans, pickles, jalapenos and more! And to make it … Read more

Quick DIY Scrap Wood Napkin Holder

DIY napkin holder made from scrap wood with folded fabric napkins inside.

I am embarrassed to admit it, but a napkin holder has been on my to-build list for years. It has taken me too long to plan a design that held the napkins without flopping over and looked beautiful enough to leave on my table. I am happy to share that I found the perfect design … Read more

Easy Over the Door Storage Shelf DIY

Over the door storage shelf made from scrap wood on a black door.

My teens never seem to have enough storage in their bathroom. So I decided to use the space on the back of the door to give them more! This simple over the door shelf holds so much more than I though it would. And the lower shelf is tall enough for big bottles. You can … Read more

DIY Freestanding Toilet Paper Holder with Storage

DIY freestanding toilet paper holder with storage for 3 additional toilet paper rolls.

After struggling with wall-mounted toilet paper holders that refuse to stay on the wall, I decided it was time to try a freestanding one. Now I have the perfect place to hold my toilet paper as well as up to 3 extra rolls. But the best part, this entire project was built from scraps. Nothing … Read more

DIY Wood Seed Storage Boxes

Two DIY wood seed storage boxes to hold seed packets.

With spring around the corner, I bought more seeds to plant in my raised garden bed. But my current storage solution was not big enough to hold all the seed packets. Since I am working hard to use up plywood scraps this month, I knew I could build the ultimate seed storage box and get … Read more

Easy DIY Behind the Door Shelf

Plywood behind the door shelf with three shelves.

If you are looking for more storage, but are running out of space, it’s time to use the space hidden behind your doors! This easy to build shelf is small enough to tuck behind a door in a bedroom, bathroom or pantry. Even though it is small and shallow, it can hold a lot! Ways … Read more

DIY Under Sink Drawer and Shelf Organizers

Two under sink organizers, one is a drawer and the other a shelf with paper towel holder.

I was sick of losing things under the kitchen sink. And to get to items from the back, I had to pull everything out. It was past time to get this space organized! So armed with just a few scraps of 1/2″ and 1/4″ plywood I created the ultimate under sink organizers. Each side is … Read more

Easy Wall Mounted Shoe Rack from Plywood Scraps

Wall mounted shoe rack built from scrap plywood hanging on the wall behind a door.

I was sick of tripping over the pile of shoes inside our front door. Even though we have our mudroom storage lockers with bins for shoe storage, everyone likes to keep their quick-to-slip-on pair closer to the door. So instead of yelling at everyone to put their shoes in the bucket, I created a simple … Read more

The Easiest Way to Add Adjustable Shelves to Anything

Women placing an adjustable shelf in a cabinet.

I love building cabinets and shelves to add storage to every room in my house. And to make sure the storage is super useful, I include adjustable shelves. Adjustable shelves makes it easy to change the height of the storage space or add more shelves. Without them my storage builds would not be adaptable to … Read more

DIY Miter Saw Acute Angle Jig

DIY acute angle jig on a Dewalt miter saw cutting a board.

I love my miter saw and use it on almost every build. But it has a small flaw… It can only cut angles up to 50° (most top out at 45°). However, I find myself wanting to make sharper angled cuts often. So I decided it was time to make a simple miter saw jig … Read more

Easy Tabletop Christmas Trees from 1×2 Scraps

Three tabletop Christmas trees in a cluster with garland around the back.

I love nothing more than building something from scrap wood! And it’s even better when you can use those scraps to make stunning Christmas decorations. So when I had a pile of small 1×2 boards just sitting there, I knew it was time to turn them into some beautiful tabletop Christmas trees. These simple wood … Read more

DIY Wood Gingerbread House Village

Three DIY wood gingerbread houses on a table with garland around them.

Gingerbread houses are a strong part of my Christmas memories. We always had so much fun decorating them. But they can also be very finicky to assemble. If you do not cook them properly, they crumble. And they can go bad, or get eaten by the kids or pets. So this year I am enjoying … Read more